Top Swing 180° Reversible
A top swing 180 degrees window is a modern outward opening window, where the sash can be turned approx. 170 degrees on the vertical plane. This function is especially usable, where it is necessary that the window can be cleaned from the inside.
As the sash turns outside the frame, this type of window also has the advantage, that it can be opened without removing flowers, curtains and other decorations from the windowsill.
90° Top Slide “Top Sliding“
This type of window is very common in modern Scandinavian family houses today.
This type of window has today replaced the traditional top hung windows, as they are very user friendly. They open less outwards than a top hung window, but they still provide more ventilation. When opening, the sash slides down in the top and thereby provides ventilation also in the top of the window.
Side swing 90°
A side swing window is a modern outward opening window, where the sash typically can be opened to 90 degrees in the horizontal plane.This function is usable on smaller windows up to a sash width of 900 mm, where it is necessary to be able to clean the window from the inside. By loosening a screw in the fitting the window can be opened to 120 degrees, which makes the cleaning easier. This is a simple and reliable window type, which is very popular.
Side hung
Hinges are the oldest type of window hardware still in use and side hung windows are still the most common Scandinavian type window. As a hinge has its turning point outside the window, the sash can open wide and – depending on the positioning of the frame in the wall, it can be opened to be level with the wall. This type of window has often several sashes per window and it is custom to open one window in order to clean the outside of another through the opened window.
This type of window is often used when renovating older buildings and in new houses, built in traditional style.
Freedom of choice by TEKNOS (Finland)
Rawington Ltd is proud to offer windows coated with paints and stains from leading Europe’s manufacturer TEKNOS.
Windows can be painted to any RAL Classic colour chart colours.
Dual colour available. (Windows, doors painted with different colours outside & inside).
Various stains available as standard. If there is a requirement to match interior or exterior stain colours to existing elements (Flooring, furniture etc ) Nonstandard stains available on request.
All windows are finished with Teknos Total Factory Applied Protection (TFAP) systems which allow joinery manufacturers to produce fully engineered exterior joinery, with almost unlimited colour choice, in a single integrated finishing process.
By combining topically applied preservation technology, novel end-grain and joint sealing with protective basecoats and a flexible microporous paint system, the Teknos system allows manufacturers to meet the latest European performance standards whilst reducing process times and working capital.
View or download the Total Factory Applied Protection brochure
View or download Available Colours chart
View or download Available Stains chart
All our aluminium profiles are powder coated using leading IGP Pulvertechnik AG (Switzerland)
powders and coatings. Marine powder coating available for better protection of windows on coastal locations.
Weather-resistant coating system for metal facades and structural components in exterior environments.
Outgassing-friendly, weather-resistant coating powder for application on exhalating substrates.
Highly weather-resistant coating powder with low curing temperatures.
Swiss quality by
Rawington Ltd is proud to offer glazing units from leading Europe’s manufacturer Press-Glas. Conformity with the ISO norms is a guarantee of high quality and reliability of offered products and services.
As a standard all our glazing units supplied with warm edge spacer bar.
Warm edge spacer can be different colours. more information
Nordwin System can be supplied with:
Rawington Ltd is proud to offer Open out windows & doors fitted with ironmongery from leading Danish manufacturer PN Beslag (Denmark).
PN Hardware is to perform good and trustworthy business practice and is to be a reliable collaborator for customers, suppliers and society.
System for doors and windows
PN System 700
is a system for production of all types of outward windows and doors in timber and timber/aluminium adjusted to a 12 x 7mm groove in frame and 17.6 x 6mm in sash.
Security
All fittings are developed and tested on the basis of the highest demands on strength and function – including BS 7950 / BS 6375:Part 2 (strength and burglary)
Friction
The glider in the aluminium channel is pre-oiled when delivered. The plastic part giving one of the best frictions on market is containing glass fibres providing great durability and stability. The friction with variable regulation.
Standard handles from MILA
Optional designer handles:
Turnstyle design handles
Anvil
All our windows can be supplied with Trickle vents if required:
Available colours: anodised (natural aluminium colour), brown and white.
